Design and Fabrication of FPV Racing Drone

Authors

  • Waqar Ahmed Siddiqui Department of Aerospace Engineering, Amity School of Engineering and Technology Lucknow, Amity University Uttar Pradesh, India
  • Dr. M. C. Srivastava Department of Aerospace Engineering, Amity School of Engineering and Technology Lucknow, Amity University Uttar Pradesh, India
  • Sumit Krishnan Drone Instructor, Indian Drone Academy Pvt. Ltd, Hyderabad, India
  • Vivek Verma Department of Aerospace Engineering, Amity School of Engineering and Technology Lucknow, Amity University Uttar Pradesh, India

DOI:

https://doi.org/10.54060/a2zjournals.jmce.38

Keywords:

First-Person View, UAV, Hawkeye view

Abstract

This research focuses on the designing aspects of a first-person view (FPV) Drone. An FPV drone is an unmanned aerial vehicle (UAV) that transmits Hawkeye's view to the ground control station. It's called a Hawkeye similar to the view that an eagle gets when it flies. It is also recognized for its dynamic behavior, the ease and flexibility of maneuvering. The response time of the FPV drone is quite remarkable for the purpose it serves. We have worked on the SP3 F3 racer Flight controller which is known for its extreme autopiloting and stability. Designing, developing, and simulating such a dy-namic drone was a challenging task done with ease. It has a range of about 3 KM and a flight time of 11-12 minutes on (not so vigorous) flying conditions.

Downloads

Download data is not yet available.

References

“Boletín Oficial del Estado,” no. 252. 2014 https://www.boe.es/boe/dias/2014/10/17/

J. Gundlach, Designing unmanned aircraft systems: A comprehensive approach. American Institute of Aeronautics and Astronautics, 2012.

R. E. Hofer. “Preliminary design of an unmanned aerial vehicle with application to photovoltaic farm inspection”, 2014.

J. R. Wertz, D. F. Everett, and J. J. Puschell, “Space mission engineering: the new SMAD,” Microcosm Press, 2011. https://astrobooks.com/spacemissionengineeringthenewsmadsme-smadwertzeverettpuschellavailablespring2011softcover.aspx

D. Norris, “Build your own quadcopter,” McGraw-Hill Education, 2014. https://www.asemanx.com/wp-content/uploads/2021/09/Build-your-own-quadcopter-power-up-your-designs-with-the-Parallax-Elev-8.pdf

S. Bouabdallah, “Design and control of quadrotors with application to autonomous flying,” PhD thesis, École Polytech-nique federale de Lausanne, 2007. https://www.researchgate.net/publication/37439805_Design_and_Control_of_quadrotors_with_application_to_autonomous_flying

I. A. Manarvi, M. Aqib, M. Ajmal, M. Usman, S. Khurshid, and U. Sikandar, “Design and development of a quad copter (UMAASK) using CAD/CAM/CAE,” IEEE Aerospace Conference, 2013.

C. Robert, “Flight stability and automatic control”, WCB/McGraw Hill, vol. 2, 1998.

C. Balas, “Modelling and Linear Control of Quadcopter,” PhD thesis, MS Thesis, Cranfield University, Cranfield, 2007. https://www.scribd.com/document/247123109/Modelling-and-Linear-Control-of-Quadcopter-SimuLINK#

R. W. Beard, “Quadrotor dynamics and control,” Brigham Young University, 2008 https://www.researchgate.net/publication/265825340_Quadrotor_Dynamics_and_Control

JMCE 038

Downloads

Published

2024-04-25

How to Cite

[1]
W. Ahmed Siddiqui, M. C. Srivastava, S. Krishnan, and V. Verma, “Design and Fabrication of FPV Racing Drone”, J. Mech. Constr. Eng., vol. 4, no. 1, pp. 1–8, Apr. 2024.

CITATION COUNT

Issue

Vol. 4 No. 1 (2024)

Section

Research Article

License

Copyright (c) 2024 Waqar Ahmed Siddiqui, Dr. M. C. Srivastava, Sumit Krishnan, Vivek Verma

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC