Green Mortar by Partial Introduction of Shredded Waste Plastic

Authors

  • Anant Agarwal Department of Civil Engineering, Amity School of Engineering and Technology, Amity University Uttar Pradesh, Lucknow Campus, India
  • Devesh Ojha Department of Civil Engineering, Amity School of Engineering and Technology, Amity University Uttar Pradesh, Lucknow Campus, India

DOI:

https://doi.org/10.54060/JMCE/001.01.001

Keywords:

Green mortar, waste plastic, environment friendly

Abstract

Plastic products have become an integral part of our daily life as a basic need. It is produced on a massive scale worldwide and its production crosses 150 million tons per year globally. In India, approximately 9 million tons of plastic products are consuming every year (2010) which is expected to rise to 12 million tons by 2012 and estimates say it would double this value in 2025. Its broad range application is mainly in packing films, wrapping materials, fluid containers, clothing, household, and industrial products and building materials. This project deals with an effective method of dumping plastic waste that has accumulated. Using plastics in building mortar and plasters can be employed in an effective manner that is completely environment friendly.

Downloads

Download data is not yet available.

References

N. Saikia and J. de Brito, “Use of plastic waste as aggregate in cement mortar and concrete preparation: A review,” Constr. Build. Mater., vol. 34, pp. 385–401, 2012.

Z. Ge, D. Huang, R. Sun, and Z. Gao, “Properties of plastic mortar made with recycled polyethylene terephthalate,” Constr. Build. Mater., vol. 73, pp. 682–687, 2014.

J. L. Ruiz-Herrero et al., “Mechanical and thermal performance of concrete and mortar cellular materials containing plastic waste,” Constr. Build. Mater., vol. 104, pp. 298–310, 2016.

B. Coppola, L. Courard, F. Michel, L. Incarnato, and L. Di Maio, “Investigation on the use of foamed plastic waste as natural aggregates replacement in lightweight mortar,” Compos. B Eng., vol. 99, pp. 75–83, 2016.

I. Mercante, C. Alejandrino, J. P. Ojeda, J. Chini, C. Maroto, and N. Fajardo, “Mortar and concrete composites with recycled plastic: A review,” Sci. Technol. Mater., vol. 30, pp. 69–79, 2018.

Downloads

Published

2021-03-10

How to Cite

[1]
A. Agarwal and D. Ojha, “Green Mortar by Partial Introduction of Shredded Waste Plastic”, J. Mech. Constr. Eng., vol. 1, no. 1, pp. 1–4, Mar. 2021.

CITATION COUNT

Issue

Section

Research Article